PhysicsClassical Physics

Motion in a Circle: Acceleration and Rim Speed of a Grindstone

Convert a grindstone’s rotation rate into centripetal acceleration, multiples of g, and tangential rim speed.

Question

A workshop grindstone of radius 7.50 cm turns at 6500 rev/min. (a) Determine the centripetal acceleration magnitude at the rim in m/s² and as a multiple of g. (b) Determine the linear speed at the rim.

Convert the rotation rate and radius

The stated 7.50 cm7.50\,\mathrm{cm} is a radius, so r=0.0750 mr=0.0750\,\mathrm{m}. Convert revolutions per minute to radians per second:

ω=6500 revmin×2π rad1 rev×1 min60 s=680.678 rad/s.\omega=6500\,\frac{\mathrm{rev}}{\mathrm{min}} \times\frac{2\pi\,\mathrm{rad}}{1\,\mathrm{rev}} \times\frac{1\,\mathrm{min}}{60\,\mathrm{s}} =680.678\,\mathrm{rad/s}.

(a) Centripetal acceleration and multiple of g

ac=ω2r=(680.678)2(0.0750)=3.47492×104 m/s2≈3.47×104 m/s2.a_c=\omega^2r=(680.678)^2(0.0750) =3.47492\times10^4\,\mathrm{m/s^2} \approx3.47\times10^4\,\mathrm{m/s^2}.

Using g=9.80 m/s2g=9.80\,\mathrm{m/s^2},

acg=34749.29.80=3545.84≈3.55×103.\frac{a_c}{g}=\frac{34749.2}{9.80}=3545.84\approx3.55\times10^3.

Thus the acceleration magnitude is about 3.55×103g3.55\times10^3g, directed from the rim toward the rotation axis. This ratio compares accelerations; it does not describe a changed local gravitational field.

(b) Linear speed at the rim

v=ωr=(680.678)(0.0750)=51.0509 m/s≈51.1 m/s.v=\omega r=(680.678)(0.0750) =51.0509\,\mathrm{m/s}\approx51.1\,\mathrm{m/s}.

The rim velocity is tangent to the circle. Checking v2/rv^2/r gives the same aca_c as ω2r\omega^2r. The rotation rate is treated as constant; acceleration from spin-up is outside this exercise.

Evidence boundary

The two-part grindstone exercise is OpenStax College Physics 2e, Chapter 6, Problem 14. The solution treats 7.50 cm as the rim radius and 6500 rev/min as a constant rotation rate, with g = 9.80 m/s² for comparison. It calculates ideal kinematic acceleration and speed, not material strength, forces, or safe operating limits.

Sources

These references support the concepts and methods used in the explanation above.