PhysicsClassical Physics

Knowledge guide

How Incline Forces Produce a Linear Normal-Force Graph

Resolve gravity on an incline and interpret the slope of a normal-force versus cosine graph, including the static-friction condition.

Choose axes that match the contact surface

For a block on a straight incline, choose one axis parallel to the surface and one perpendicular to it. Gravity still points straight down; only its components change with this choice of axes. For incline angle θ\theta above the horizontal, the components have magnitudes mgsin⁡θmg\sin\theta down the plane and mgcos⁡θmg\cos\theta into the plane. The actual normal force is perpendicular outward; friction, when present, acts along the plane in the direction that opposes impending or actual relative motion.

When a block remains at rest with no other applied forces, equilibrium gives N=mgcos⁡θN=mg\cos\theta and the required static friction fs=mgsin⁡θf_s=mg\sin\theta. Static friction can supply that value only while it remains within its maximum available magnitude, fs≤μsNf_s\le\mu_sN; otherwise the assumed rest state is impossible. This condition matters before applying the equilibrium equations to a real setup.

Linearize by transforming the independent variable

NN is not generally a straight-line function of the angle measured in degrees. It is a straight-line function of x=cos⁡θx=\cos\theta:

N=(mg)x.N=(mg)x.

Thus an NN-versus-cos⁡θ\cos\theta plot has theoretical slope mgmg in newtons and a theoretical intercept of zero. The cosine is dimensionless, so the slope has force units. Real rounded measurements can produce a small nonzero fitted intercept; that alone does not change the model's slope interpretation. A fit that forces the intercept to zero can yield a slightly different numerical slope than a free-intercept fit, so report the fitting choice.

A fresh check

Suppose a 6.0 kg block rests on a 25° incline and sufficient static friction is available. With g=9.8 m/s2g=9.8\,\mathrm{m/s^2}, its weight is 58.858.8 N, normal force is 58.8cos⁡25∘≈53.358.8\cos25^\circ\approx53.3 N, and required uphill static friction is 58.8sin⁡25∘≈24.958.8\sin25^\circ\approx24.9 N. These are calculated forces for this new example, not measurements from any workbook. Checking μsN≥24.9\mu_sN\ge24.9 N determines whether rest is physically possible.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Angela and Carlos Are Asked to Determine the Relationship Between Normal Force and Incline Angle

Sources

These references support the core concepts and interpretation boundaries explained above.