PhysicsClassical Physics

Electric Field Units: Field and Force on a Negative Charge

Find the electric field from an upward force on a positive charge, then calculate the force on a negative charge at the same point.

Question

At a particular point in an electric field, a particle carrying charge +2.0×10−8 C+2.0\times10^{-8}\,\mathrm{C} is acted on by an upward electric force of magnitude 4.0×10−6 N4.0\times10^{-6}\,\mathrm{N}.

(a) Determine the electric field at this point.

(b) Replace the particle with charge q=−1.0×10−8 Cq=-1.0\times10^{-8}\,\mathrm{C} at the same point. Determine the electric force on this charge.

(a) Electric field at the point

Choose upward as the positive yy direction. The first charge is positive, so the field points in the same direction as its force:

E=F1q1=+4.0×10−6 N+2.0×10−8 C y^=+2.0×102 N/C y^.\mathbf E=\frac{\mathbf F_1}{q_1} =\frac{+4.0\times10^{-6}\,\mathrm{N}}{+2.0\times10^{-8}\,\mathrm{C}}\,\hat{\mathbf y} =+2.0\times10^2\,\mathrm{N/C}\,\hat{\mathbf y}.

The field is 2.0×102 N/C2.0\times10^2\,\mathrm{N/C} upward. The electric field units, newtons per coulomb, describe electric force per unit positive test charge.

(b) Force on the negative charge

Use the same external field and keep the new charge's negative sign:

F2=q2E=(−1.0×10−8 C)(+2.0×102 N/C) y^=−2.0×10−6 N y^.\mathbf F_2=q_2\mathbf E =(-1.0\times10^{-8}\,\mathrm{C})(+2.0\times10^2\,\mathrm{N/C})\,\hat{\mathbf y} =-2.0\times10^{-6}\,\mathrm{N}\,\hat{\mathbf y}.

The force is 2.0×10−6 N2.0\times10^{-6}\,\mathrm{N} downward. The field remains upward; the force reverses because the replacement charge is negative.

Check both magnitude and direction

The replacement has half the magnitude of the original charge, so its force has half the original magnitude. Multiplying coulombs by newtons per coulomb gives newtons. The minus sign indicates downward only because upward was defined as positive; a force magnitude itself is nonnegative.

Evidence boundary

Both answers concern the same specified external electric field at the same point. Upward is chosen as positive solely to display vector signs. No field source, spatial uniformity, particle mass, or acceleration is inferred from the problem.

Sources

Các nguồn này hỗ trợ những khái niệm và phương pháp được giải thích ở trên.