Two equivalent units for one vector field
Electric field connects a signed test charge to its electric force:
Its force-based unit is newtons per coulomb, . Electric potential also defines the electrostatic field through , giving volts per meter, .
The units agree because a volt is a joule per coulomb:
Changing from N/C to V/m does not change the field value or direction. Field strength is not a force until it is multiplied by a charge.
Field direction uses a positive-charge convention
A positive charge experiences force along ; a negative charge experiences force opposite . Dividing a force vector by a negative charge also reverses direction. Replacing the test particle does not reverse the external field if that particle leaves the sources unchanged.
For one axis, use . For magnitudes alone, use . Mixing a nonnegative force magnitude with signed and then calling the result a magnitude loses this distinction.
A new example from potential
Suppose a uniform field region has potential that falls from to as increases by :
A charge placed there has
The field points toward increasing , where potential is lower. The force on the negative charge points toward decreasing .
Checks that transfer between problems
| Check | Meaning |
|---|---|
| Convert charge to coulombs | Prevent a prefix error in or |
| Identify vector component or magnitude | Preserve the sign convention |
| Multiply by | Recover newtons for force |
| Ask whether the field is uniform | A finite gives the constant component only in the stated uniform case; otherwise it is a path average |
No particle mass is needed for electric force. To determine acceleration, the mass and any other forces must also be supplied.
Related question
Apply this knowledge
Use the concept guide to understand the reasoning, then return to the complete question and worked answer.
Electric Field Units: Field and Force on a Negative ChargeSources
These references support the core concepts and interpretation boundaries explained above.