PhysicsClassical Physics

Knowledge guide

Coulomb's Constant: Meaning, SI Units and Model Limits

Understand what Coulomb’s constant converts, how its units make the inverse-square law work, and when the vacuum point-charge model applies.

What Coulomb's constant means

Coulomb's constant kek_e connects a charge-and-distance calculation to an electric force in SI units:

F=ke∣q1q2∣r2,ke=14πε0≈8.99×109 N m2/C2.F=k_e\frac{|q_1q_2|}{r^2},\qquad k_e=\frac{1}{4\pi\varepsilon_0}\approx8.99\times10^9\,\mathrm{N\,m^2/C^2}.

Here FF is a magnitude. Charge signs separately determine attraction or repulsion. The constant does not make the force constant: changing rr changes FF.

Let the units check the substitution

Charges must be in coulombs and center-to-center separation in meters when using this numerical value of kek_e.

[ke]=N m2C2,[q1q2/r2]=C2m2.[k_e]=\frac{\mathrm{N\,m^2}}{\mathrm{C^2}},\qquad [q_1q_2/r^2]=\frac{\mathrm{C^2}}{\mathrm{m^2}}.

Their product is a newton. If a charge is entered in nanocoulombs without conversion, the product of two charge values introduces a factor-of-101810^{18} error. A distance conversion matters twice because the distance is squared.

A new macroscopic example

Consider two small stationary charged beads in vacuum, carrying +4.0 nC+4.0\,\mathrm{nC} and +7.0 nC+7.0\,\mathrm{nC}, with centers 0.20 m0.20\,\mathrm m apart. Treat them as point charges:

F=(8.99×109)(4.0×10−9)(7.0×10−9)(0.20)2≈6.3×10−6 N.F=\frac{(8.99\times10^9)(4.0\times10^{-9})(7.0\times10^{-9})}{(0.20)^2} \approx6.3\times10^{-6}\,\mathrm N.

The force is repulsive. Doubling the separation with the charges fixed reduces it to one quarter. Reversing only one charge changes attraction versus repulsion, but leaves the magnitude unchanged.

Choose the model before calculating

Direct use of the vacuum formula describes electrostatic point charges; a small charged body may be approximated this way when its dimensions are negligible compared with separation. For an extended distribution, add or integrate vector contributions rather than using an arbitrary distance to the entire object.

For ideal free point charges embedded in an infinite homogeneous linear dielectric, replace ε0\varepsilon_0 with the medium permittivity ε=εrε0\varepsilon=\varepsilon_r\varepsilon_0. Boundaries, nonuniform media, and microscopic local fields can require a more detailed model. Air is often approximated as vacuum in elementary problems; that approximation is different from silently assigning a dielectric constant to a crystal.

Finally, the interaction of one pair is only one contribution to a many-charge system. A net force requires the vector sum of all relevant contributions.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Coulomb's Constant: Attraction Between Sodium and Chloride Ions

Sources

These references support the core concepts and interpretation boundaries explained above.