PhysicsClassical Physics

Capacitance Units: Storing 3.00 μC at 120 V

Use C = Q/V to calculate the required capacitance in farads, nanofarads, and microfarads for 3.00 μC at 120 V.

Question

Determine the capacitance required for a capacitor to store a charge of 3.00 μC3.00\,\mu\mathrm{C} when the potential difference across it is 120 V120\,\mathrm{V}.

Required capacitance

Capacitance is charge magnitude on one plate divided by the potential difference across the capacitor:

C=QV.C=\frac{Q}{V}.

Convert the supplied charge before substituting:

Q=3.00 μC=3.00×10−6 C.Q=3.00\,\mu\mathrm C=3.00\times10^{-6}\,\mathrm C.

Then

C=3.00×10−6 C120 V=2.50×10−8 F.C=\frac{3.00\times10^{-6}\,\mathrm C}{120\,\mathrm V} =2.50\times10^{-8}\,\mathrm F.

The required capacitance is 2.50×10−8 F2.50\times10^{-8}\,\mathrm F, equivalently 25.0 nF25.0\,\mathrm{nF} or 0.0250 μF0.0250\,\mu\mathrm F. These are alternative unit representations of the same result, not additional measurements.

Convert and verify the units

UnitEquivalent capacitance
Farad, F=C/V\mathrm F=\mathrm{C/V}2.50×10−8 F2.50\times10^{-8}\,\mathrm F
Nanofarad, 1 nF=10−9 F1\,\mathrm{nF}=10^{-9}\,\mathrm F25.0 nF25.0\,\mathrm{nF}
Microfarad, 1 μF=10−6 F1\,\mu\mathrm F=10^{-6}\,\mathrm F0.0250 μF0.0250\,\mu\mathrm F

Substitution checks the answer:

CV=(2.50×10−8 F)(120 V)=3.00×10−6 C.CV=(2.50\times10^{-8}\,\mathrm F)(120\,\mathrm V)=3.00\times10^{-6}\,\mathrm C.

This returns the specified charge. The symbol CC denotes capacitance here, whereas upright C\mathrm C denotes the coulomb unit.

Evidence boundary

The result follows from the stated charge and voltage in the ideal charge–voltage relation. The problem does not provide a voltage tolerance or specify the precision of the trailing zero in 120 V; the displayed equivalent values do not add measured precision. Plate dimensions, dielectric material, and a practical voltage rating are not determined.

Sources

Các nguồn này hỗ trợ những khái niệm và phương pháp được giải thích ở trên.