Question
A 9.00 V battery is available with two capacitors rated 2.00 μF and 7.40 μF.
(a) Determine the stored charge and energy when both capacitors are connected in series across the battery.
(b) Determine the same quantities when they are connected in parallel across the battery.
(a) Series connection
First replace the two capacitors by their series equivalent. Keep extra digits until the final results:
The charge magnitude on either capacitor equals the charge drawn onto the equivalent capacitor:
Each capacitor has opposite charges on its two plates. The 14.2 μC value is the magnitude on one plate; it is not the net charge of an entire capacitor. The series-bank terminal charge is also 14.2 μC, rather than twice that value.
The individual voltage magnitudes are 7.09 V and 1.91 V, summing to 9.00 V. Using the unrounded charge in the energy formula gives:
The energy of the bank is:
(b) Parallel connection
Both capacitors now have the full 9.00 V across them. Their equivalent capacitance is:
Apply the battery voltage to each capacitance separately:
The bank terminal-charge magnitude is their sum, 84.6 μC. Individual energies are:
(the unrounded second value is 299.7 μJ). Their total is:
Results compared
| Quantity | Series | Parallel |
|---|---|---|
| Equivalent capacitance | 1.57 μF | 9.40 μF |
| Charge magnitude on 2.00 μF capacitor | 14.2 μC | 18.0 μC |
| Charge magnitude on 7.40 μF capacitor | 14.2 μC | 66.6 μC |
| Bank terminal-charge magnitude | 14.2 μC | 84.6 μC |
| Total stored energy | 63.8 μJ | 381 μJ |
At the same battery voltage the parallel bank stores more energy because its equivalent capacitance is larger. These calculated bank totals agree with the source exercise's published solution.
Evidence boundary
This is an editorial restatement of OpenStax College Physics, BCcampus 2016 edition, Section 19.7 Exercise 4. It treats the capacitors as initially uncharged, ideal components connected across the stated battery until charged. Values are theoretical predictions, not measured results; charge denotes the magnitude on one plate or at a bank terminal, not the net charge of a complete capacitor.
Sources
Các nguồn này hỗ trợ những khái niệm và phương pháp được giải thích ở trên.