Work follows the force–displacement angle
For a constant force and straight displacement,
The angle α is between the force and displacement vectors. A component in the direction of displacement does positive work, an opposing component does negative work, and a perpendicular component does zero work. For varying force, use the corresponding path integral.
The unit is the joule: 1 J = 1 N·m. A force magnitude alone does not determine work; displacement and direction also matter.
An angled pull also changes friction
For an object moving along a level surface with no vertical acceleration, an upward pull of magnitude F at angle θ gives
The upward force component does no work on a purely horizontal displacement, but it reduces the normal force and therefore changes kinetic friction. This is why “zero work” and “no physical effect” are different statements.
If the object is pulled at constant velocity,
These expressions assume continued contact, N ≥ 0, and sliding governed by the stated kinetic-friction model. A downward push increases N instead; the sign of the vertical force component must change in the force balance.
A fresh example with nonzero net work
A handle exerts a constant 50 N force at 60° above the horizontal while a crate moves 4 m horizontally. The kinetic-friction force is specified as 8 N opposite motion, and the crate remains on the level surface.
Gravity and the normal force do zero work, so the net work is 68 J. The work–energy theorem says the crate gains 68 J of translational kinetic energy. This example does not assume constant velocity; its positive net work is consistent with acceleration.
Audit every force, then sum
| Check | What it prevents |
|---|---|
| Draw force and displacement directions | Using the wrong angle in the dot product |
| Resolve vertical forces before finding friction | Automatically replacing N with mg |
| Keep the sign of each work contribution | Reporting opposing friction as positive work on the object |
| Sum all force contributions | Confusing one force’s work with ΔK |
Constant speed of a point mass means unchanged kinetic energy, hence zero net work. It does not require every individual work contribution to vanish. For an upward pull against friction, positive pulling work can balance negative frictional work.
Related question
Apply this knowledge
Use the concept guide to understand the reasoning, then return to the complete question and worked answer.
Work and Physics: Pulling a Sled at Constant VelocitySources
These references support the core concepts and interpretation boundaries explained above.