PhysicsClassical Physics

Knowledge guide

Why Objects That Stick Together Lose Kinetic Energy

Understand common velocity, center-of-mass motion and kinetic energy loss in perfectly inelastic collisions, with a new two-sled example.

What makes a collision perfectly inelastic?

In an ordinary dissipative inelastic collision, the total translational kinetic energy of the colliding objects decreases. A perfectly inelastic collision ends with the objects moving together. Their relative motion has disappeared, though their combined motion need not stop.

Total momentum is conserved only when the external impulse on the chosen system is negligible over the collision. Internal forces transfer momentum between the objects, but cancel in the system's total momentum balance. Deformation and heating can change kinetic energy without changing that total momentum.

The common velocity is a signed, mass-weighted mean

For two objects that stick, momentum conservation gives

vf=m1u1+m2u2m1+m2.v_f=\frac{m_1u_1+m_2u_2}{m_1+m_2}.

The initial velocities must use the same axis and frame. Opposite directions require opposite signs; adding speed magnitudes can give the wrong direction. A zero total momentum produces a zero common velocity even when both objects were moving before contact.

Separate center-of-mass motion from relative motion

Let M=m1+m2M=m_1+m_2 and μ=m1m2/M\mu=m_1m_2/M. The initial kinetic energy can be decomposed as

Ki=12Mvcm2+12μ(u1−u2)2.K_i=\frac12Mv_{\mathrm{cm}}^2+\frac12\mu(u_1-u_2)^2.

After the objects stick, they share vcmv_{\mathrm{cm}} and their relative velocity is zero. Therefore

Ki−Kf=12μ(u1−u2)2.K_i-K_f=\frac12\mu(u_1-u_2)^2.

This is the maximum loss of translational kinetic energy consistent with the same total momentum and masses in the simple two-object model. Total energy still balances when internal energy, sound and other channels are included.

A new example: two sleds

On a nearly frictionless track, a 2.0 kg2.0\,\mathrm{kg} sled moving at +3.0 m/s+3.0\,\mathrm{m/s} sticks to a 1.0 kg1.0\,\mathrm{kg} sled moving at −1.0 m/s-1.0\,\mathrm{m/s}. Their combined velocity is

vf=2(3)+1(−1)3=53 m/s.v_f=\frac{2(3)+1(-1)}{3}=\frac53\,\mathrm{m/s}.

The initial kinetic energy is 9.5 J9.5\,\mathrm{J}; the final kinetic energy is 25/6 J25/6\,\mathrm{J}. The loss is 16/3 J16/3\,\mathrm{J}, also obtained from 12(2/3)(3−(−1))2\frac12(2/3)(3-(-1))^2. These are theoretical values for the stated example, not experimental observations.

Checks that transfer to another problem

Verify that the common signed velocity lies between the initial signed velocities, that final momentum equals initial momentum, and that kinetic energy does not increase in this sticking model. A measured momentum discrepancy calls for checking external impulse, the chosen system, and measurement uncertainty. It does not justify forcing energy conservation onto a sticking collision.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Inelastic Collision: Final Velocity of Two Coupled Train Cars

Sources

These references support the core concepts and interpretation boundaries explained above.