PhysicsClassical Physics

Rotation of Inertia: A Thin Rod with an Axis at L/3

Calculate the moment of inertia of a thin rod about an axis at L/3 by integration and verify ML²/9 with the parallel-axis theorem.

Question

A thin rod has mass M and length L. Its perpendicular rotation axis crosses the rod one-third of the length from one end, leaving segments L/3 and 2L/3. Determine its moment of inertia using direct integration, and independently verify the result using the parallel-axis theorem.

Result and model

The requested rotational quantity is the moment of inertia. “Rotation of inertia” is the search wording; the standard physical term is moment of inertia or rotational inertia. For the standard uniform thin-rod model,

I=ML29.I=\frac{ML^2}{9}.

1. Direct integration

Let s measure position along the rod from its nearer end. The axis is at s = L/3, perpendicular to the rod. Uniform linear density gives dm = (M/L) ds, and the perpendicular distance to the axis is |s − L/3|. Thus

I=ML∫0L(s−L3)2 ds=M3L[(2L3)3−(−L3)3]=ML29.I=\frac{M}{L}\int_0^L\left(s-\frac{L}{3}\right)^2\,ds =\frac{M}{3L}\left[\left(\frac{2L}{3}\right)^3-\left(-\frac{L}{3}\right)^3\right] =\frac{ML^2}{9}.

Equivalently, choose the origin at the pivot and integrate x² from −L/3 to 2L/3. Both segments contribute positively; the rod does not end at the pivot.

2. Independent parallel-axis check

The center of mass is at L/2, so the distance between the parallel center and pivot axes is d = L/6. With I_CM = ML²/12,

I=ICM+Md2=ML212+M(L6)2=ML29.I=I_{\mathrm{CM}}+Md^2 =\frac{ML^2}{12}+M\left(\frac{L}{6}\right)^2 =\frac{ML^2}{9}.

The two requested methods agree. The result has SI units kg·m² and lies between the center-axis value ML²/12 and the end-axis value ML²/3. If density varies along the rod, its mass distribution must be supplied and the uniform-density result cannot be assumed.

Evidence boundary

This is a worked solution of OpenStax University Physics Volume 1, Chapter 10, Problem 70. The axis geometry is preserved in words from the source figure. The calculation explicitly uses the section’s standard uniform thin-rod model; the problem supplies no nonuniform density. The answer is independently derived, not attributed to an official solution key.

Sources

Các nguồn này hỗ trợ những khái niệm và phương pháp được giải thích ở trên.