The axis is part of the definition
Moment of inertia measures how mass is distributed relative to a specified rotation axis:
Here is the perpendicular distance from each mass element to that axis. The unit is . A shape and total mass alone are not enough; the axis and mass distribution also matter.
Three circular models about their central perpendicular axes
| Uniform component | Moment of inertia | Model condition |
|---|---|---|
| Solid disk, mass , radius | Uniform mass across the face | |
| Thin hoop, mass , radius | Negligible radial thickness | |
| Annulus, mass , radii | Uniform annular mass, |
For an annular cylinder rotating about its symmetry axis, the annulus formula also applies when the material density is uniform. Its height need not appear separately once its mass is given.
Derive the annulus formula instead of guessing a radius
For surface density , a radial strip has mass . Thus
Using gives . At , this reduces to the solid-disk formula. In the thin-ring limit with fixed mass, it approaches .
A new example: a uniform washer
A washer of mass has inner radius and outer radius . About its central perpendicular axis,
For the same mass and outer radius, a solid disk has and a thin hoop has . Removing central material and keeping the same total mass shifts more mass away from the axis; the washer's value falls between those models.
Add components only after fixing a common axis
For rigidly connected components, inertias about the same axis add. Concentric components use their central-axis formulas directly. If a component's center of mass is offset by distance from a parallel axis, first use .
For example, shifting the washer's axis parallel to itself by gives .
For rotation about a fixed axis, . Convert frequency in revolutions per second with . A revolutions-to-radians error is squared in the energy calculation, so it is worth checking the units before substituting.
Related question
Apply this knowledge
Use the concept guide to understand the reasoning, then return to the complete question and worked answer.
Moment of Inertia for a Circular Disk and Annular CylinderSources
These references support the core concepts and interpretation boundaries explained above.