The static-friction formula is an inequality
For ideal dry contact, the magnitude of static friction satisfies
Here is the normal force and is the dimensionless static-friction coefficient. The product gives a capacity, not the friction present in every situation.
First calculate what equilibrium requires
If a horizontal push is the only other horizontal force on an object at rest, equilibrium requires , opposite the push. Compare this required value with :
- Below the limit, friction adjusts to the required value.
- At the limit, the contact is at impending slip in the ideal model.
- Above the limit, static equilibrium is impossible; for sliding, use the kinetic-friction model instead.
New example: a toolbox on a level bench
An toolbox has . A horizontal push acts on it. There are no other vertical forces beyond support and weight.
The actual static friction is , opposite the push, because that is sufficient and below the limit. With no horizontal push, the required friction would be zero. A push exceeds the limit, so this model cannot keep the toolbox at rest.
Do not automatically substitute weight for normal force
applies to a level contact with zero vertical acceleration and no additional vertical force. A tilted surface or an angled push changes . Find it from the perpendicular force balance first.
After sliding starts
The kinetic-friction magnitude is in the simple sliding model. Calculate acceleration from the remaining net force. Do not continue using the maximum static friction after slipping, and do not infer from when it has not been provided.
Related question
Apply this knowledge
Use the concept guide to understand the reasoning, then return to the complete question and worked answer.
Static Friction Formula: Maximum Push on a 120 kg CrateSources
These references support the core concepts and interpretation boundaries explained above.