PhysicsClassical Physics

Mechanical Energy Sample: Speed and Tension in a Vertical Circle

Use mechanical energy to obtain the top speed, then radial force balance to obtain string tension: about 4.65 m/s at the top, 59.8 N at the bottom, and 1.0 N at the top.

Question

A ball of mass 1.0 kg is attached to a string 2.0 m long and moves in a vertical plane. Its speed at the lowest point is 10 m/s.

(a) Determine its speed at the highest point of the circular path. (b) Determine the string tension at both the lowest and highest points.

Model and data

Use the ideal fixed-pivot string model, neglect air resistance, and take g = 9.80 m/s². The ball’s mass is 1.0 kg, the circular radius is the 2.0 m string length, and the bottom speed is 10 m/s. Tension points toward the pivot and is perpendicular to the instantaneous motion, so it does no work while the string is taut.

(a) Speed at the top

The top is 2r = 4.0 m higher than the bottom. Set gravitational potential energy to zero at the bottom:

12mvb2=12mvt2+mg(2r).\tfrac12mv_b^2=\tfrac12mv_t^2+mg(2r).

Therefore,

vt2=vb2−4gr=100−4(9.80)(2.0)=21.6  m2/s2,v_t^2=v_b^2-4gr=100-4(9.80)(2.0)=21.6\;\mathrm{m^2/s^2}, vt=21.6=4.6476  m/s≈4.65  m/s.v_t=\sqrt{21.6}=4.6476\;\mathrm{m/s}\approx4.65\;\mathrm{m/s}.

Energy determines the speed. It does not directly determine tension, because tension is a force.

(b) Tension at the bottom

The inward direction is upward. Tension acts inward, and weight acts outward:

Tb−mg=mvb2r.T_b-mg=\frac{mv_b^2}{r}.

Thus,

Tb=(1.0)(10)22.0+(1.0)(9.80)=59.8  N.T_b=\frac{(1.0)(10)^2}{2.0}+(1.0)(9.80) =\boxed{59.8\;\mathrm N}.

(b) Tension at the top

Now inward is downward, and both tension and weight point inward:

Tt+mg=mvt2r.T_t+mg=\frac{mv_t^2}{r}.

Therefore,

Tt=(1.0)(21.6)2.0−(1.0)(9.80)=1.0  N.T_t=\frac{(1.0)(21.6)}{2.0}-(1.0)(9.80) =\boxed{1.0\;\mathrm N}.

Check the string model

At the top, Tₜ is positive, and vₜ² = 21.6 m²/s² exceeds gr = 19.6 m²/s². The ball can therefore retain the taut-string circular path. In this ideal model, tension is smallest at the top, so this check also rules out an earlier loss of tension during the upward half-circle.

Requested quantityCalculated result
Top speed4.65 m/s, approximately 4.6 m/s to two significant figures
Bottom tension59.8 N, approximately 60 N to two significant figures
Top tension1.0 N using g = 9.80 m/s²

The centripetal-force term mv²/r is the net inward force, not an additional force to add to tension and weight.

Evidence boundary

This is the ideal-model solution of OpenStax University Physics Volume 1, Chapter 8, Problem 34. A massless inextensible string, fixed pivot, and negligible air resistance are the mechanics assumptions; g = 9.80 m/s² is explicitly chosen because the exercise does not supply g. The positive top tension verifies the taut-string assumption. These are theoretical results, not measured motion or a teacher key.

Sources

Các nguồn này hỗ trợ những khái niệm và phương pháp được giải thích ở trên.