Question
A cruise ship of mass 1.00 × 10^7 kg strikes a pier at 0.750 m/s and comes to rest after moving another 6.00 m. Use impulse to calculate the average force that the ship exerts on the pier. Hint: first calculate the stopping time.
Average force on the pier
Under the constant-deceleration model used in the textbook solution, the ship exerts an average force of on the pier, in the ship's original direction of travel.
1. Find the stopping time under that model
Take the initial direction of travel as positive. The given values are , , , and .
For constant acceleration, the time-average velocity is
Therefore
The use of the arithmetic mean of the endpoint velocities is a model assumption. It is not valid for an arbitrary deceleration history.
2. Apply the impulse momentum theorem to the ship
The corresponding average retarding force is
This calculation treats the pier's contact force as the dominant horizontal stopping force, as in the source's idealized solution.
3. Reverse the force to answer the question
Newton's third law gives the opposite force on the pier:
The positive sign indicates the ship's original travel direction. Do not report the negative force on the ship as the force on the pier.
4. Check with work and distinguish the averages
The ship's initial kinetic energy is . Dividing by gives the same retarding-force magnitude, .
Distance and endpoint speeds determine this distance-average net retarding force through work. They do not, by themselves, determine the stopping time or a general time-average contact force. The constant-deceleration model makes those averages agree here; a measured impact would need its actual time or force history.
Evidence boundary
The official solution adopts the constant-deceleration model when it uses the mean speed (vi+vf)/2. Stopping distance alone does not determine a general time-average force or impact-force history. This assumption must be explicit in the answer and Evidence Boundary, not presented as a measured fact. The pier is treated as the dominant horizontal stopping agent, matching the official idealized solution. The result is an average, not a peak force or an observed crash measurement.
Sources
Các nguồn này hỗ trợ những khái niệm và phương pháp được giải thích ở trên.