PhysicsClassical Physics

Knowledge guide

Work Energy Theorem: Signed Work and Average Stopping Force

Apply net work equals kinetic-energy change, keep force signs consistent, and distinguish distance-averaged stopping force from time averages and impact peaks.

Begin with the change in kinetic energy

For a constant-mass particle, or a body's center-of-mass motion in a point-mass model:

Wnet=ΔK=12mvf2−12mvi2.W_{\mathrm{net}}=\Delta K=\frac12mv_f^2-\frac12mv_i^2.

Use the net force, including every force contributing along the displacement. Positive net work increases speed; negative net work decreases it. Zero net work leaves the initial and final speeds equal, but does not require the direction of motion to be unchanged.

Work is a directional quantity

For a constant force and straight displacement, W=Fdcos⁡αW=Fd\cos\alpha. A force opposing the displacement has α=180∘\alpha=180^\circ and negative work. A perpendicular force does no work on a particle along that displacement.

For one-dimensional motion with a varying force component:

Wnet=∫xixfFx(x) dx.W_{\mathrm{net}}=\int_{x_i}^{x_f}F_x(x)\,dx.

If d=xf−xi>0d=x_f-x_i>0, define the displacement-averaged component by:

F‾x=1d∫xixfFx(x) dx=ΔKd.\overline F_x=\frac{1}{d}\int_{x_i}^{x_f}F_x(x)\,dx=\frac{\Delta K}{d}.

This is an average over distance. A time average is instead determined by impulse divided by elapsed time. Neither average specifies the maximum instantaneous force.

A new cart example

A 4.0 kg cart moving at 6.0 m/s stops over 3.0 m under an opposing force on a level track. Its initial kinetic energy is 12(4.0)(6.0)2=72 J\tfrac12(4.0)(6.0)^2=72\ \mathrm{J}. The net work is −72 J-72\ \mathrm{J}, so:

F‾x=−723.0=−24 N.\overline F_x=\frac{-72}{3.0}=-24\ \mathrm{N}.

The force magnitude is 24 N and its direction opposes the cart's displacement. As a constant-force check, a=F/m=−6.0 m/s2a=F/m=-6.0\ \mathrm{m/s^2} gives vf2=6.02+2(−6.0)(3.0)=0v_f^2=6.0^2+2(-6.0)(3.0)=0.

How stopping distance scales

For a complete stop under a constant equivalent opposing force:

∣F‾∣=mvi22d.|\overline F|=\frac{mv_i^2}{2d}.

At fixed mass and initial speed, doubling the stopping distance halves this average force. At fixed force magnitude, doubling the initial speed quadruples the stopping distance. These comparisons describe braking distance after deceleration starts; a driver's reaction distance is a separate quantity.

Checks that prevent sign and unit errors

Convert km/h to m/s before squaring speed: divide by 3.6. Keep the energy change negative for a stop. Report whether a signed component or a positive magnitude is requested. Multiplying the unrounded average force component by the displacement must recover ΔK\Delta K.

For rotating, deforming bodies, the complete energy balance can also involve rotational kinetic energy, heat, and deformation. A car's center-of-mass stopping calculation does not by itself resolve brake-pad contact forces or the detailed collision energy distribution.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Work Energy Theorem: Stopping a 950 kg Car over 120 m and 2.00 m

Sources

These references support the core concepts and interpretation boundaries explained above.