PhysicsMaterials Science

Knowledge guide

Unit-Cell Mass, Occupancy, and Crystal Density

Connect atom sharing, cell occupancy, and unit-cell volume to the density of a crystal, with a new FCC numerical example.

Density connects structure to mass

A crystalline material repeats a unit cell through space. Its ideal density is the mass inside one cell divided by that cell’s volume. Atoms drawn on a boundary are shared; counting every visible sphere as a whole atom overestimates the cell mass.

Site in a conventional cellContribution to one cell
Corner1/8 atom
Face center1/2 atom
Edge center1/4 atom
Entirely inside the cell1 atom

For fully occupied, monatomic cubic cells, these fractions give one atom for simple cubic, two for body-centered cubic, and four for face-centered cubic. The number of nearest neighbors is a different quantity and does not replace the atom count in a density calculation.

Derive the density relation

One atom of a substance with molar mass MM has mass M/NAM/N_A. If the cell contains nn atoms and has volume VV:

mcell=nMNA,ρ=nMNAV.m_{\mathrm{cell}}=\frac{nM}{N_A},\qquad \rho=\frac{nM}{N_AV}.

For a cubic cell only, V=a3V=a^3. Use aa in centimeters when MM is in g/mol and ρ\rho is in g/cm³. Useful conversions are 1 nm=10−7 cm1\,\mathrm{nm}=10^{-7}\,\mathrm{cm} and 1 A˚=10−8 cm1\,\text{Å}=10^{-8}\,\mathrm{cm}.

A new FCC example

Consider a hypothetical fully occupied FCC elemental crystal with M=60.0 g/molM=60.0\,\mathrm{g/mol} and a=0.400 nma=0.400\,\mathrm{nm}. This is a practice model, not a measurement assigned to a real element.

ρ=4(60.0)(6.02214076×1023)(4.00×10−8)3=6.23 g/cm3.\rho=\frac{4(60.0)}{(6.02214076\times10^{23})(4.00\times10^{-8})^3}=6.23\,\mathrm{g/cm^3}.

Changing the assumed cell occupancy changes the numerator; changing the lattice spacing changes the volume through its cube. This explains why both composition and atomic arrangement matter to density.

Check the model before using it

The formula assumes the stated cell geometry and occupancy. For a compound, sum the masses of all atoms in the cell rather than using one elemental molar mass. Defects, mixed occupancy, and a specimen’s macroscopic porosity require additional information. A density result alone does not establish strength, conductivity, or a unique chemical identity.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Material and Material Science: Calculate a BCC Metal's Atomic Weight

Sources

These references support the core concepts and interpretation boundaries explained above.