PhysicsClassical Physics

Knowledge guide

Static Friction Is a Limit, Not an Automatic Force

Calculate the friction required for equilibrium, then compare it with μsN; use equality only at the slipping threshold.

The static-friction formula is an inequality

For ideal dry contact, the magnitude of static friction satisfies

0≤fs≤fs,max⁡=μsN.0\le f_s\le f_{s,\max}=\mu_sN.

Here NN is the normal force and μs\mu_s is the dimensionless static-friction coefficient. The product μsN\mu_sN gives a capacity, not the friction present in every situation.

First calculate what equilibrium requires

If a horizontal push PP is the only other horizontal force on an object at rest, equilibrium requires fs=Pf_s=P, opposite the push. Compare this required value with μsN\mu_sN:

  • Below the limit, friction adjusts to the required value.
  • At the limit, the contact is at impending slip in the ideal model.
  • Above the limit, static equilibrium is impossible; for sliding, use the kinetic-friction model instead.

New example: a toolbox on a level bench

An 8.00 kg8.00\,\mathrm{kg} toolbox has μs=0.400\mu_s=0.400. A horizontal 12.0 N12.0\,\mathrm N push acts on it. There are no other vertical forces beyond support and weight.

N=(8.00)(9.80)=78.4 N,fs,max⁡=0.400(78.4)=31.36 N.N=(8.00)(9.80)=78.4\,\mathrm N,\qquad f_{s,\max}=0.400(78.4)=31.36\,\mathrm N.

The actual static friction is 12.0 N12.0\,\mathrm N, opposite the push, because that is sufficient and below the limit. With no horizontal push, the required friction would be zero. A 35.0 N35.0\,\mathrm N push exceeds the limit, so this model cannot keep the toolbox at rest.

Do not automatically substitute weight for normal force

N=mgN=mg applies to a level contact with zero vertical acceleration and no additional vertical force. A tilted surface or an angled push changes NN. Find it from the perpendicular force balance first.

After sliding starts

The kinetic-friction magnitude is fk=μkNf_k=\mu_kN in the simple sliding model. Calculate acceleration from the remaining net force. Do not continue using the maximum static friction after slipping, and do not infer μk\mu_k from μs\mu_s when it has not been provided.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Static Friction Formula: Maximum Push on a 120 kg Crate

Sources

These references support the core concepts and interpretation boundaries explained above.