MathCalculus

Knowledge guide

Limit Notation: One-Sided Limits, Tables, and Removable Holes

Understand what approaches in a limit statement, why two sides must agree, and how numerical tables differ from a proof of a limit.

Read the input and output separately

The statement

lim⁡t→aF(t)=L\lim_{t\to a}F(t)=L

says that the outputs can be made arbitrarily close to LL by taking the input sufficiently close to aa, while t≠at\ne a. The symbol aa is the approached input; LL is the approached output. The notation alone does not assign a value to F(a)F(a).

For an approach point accessible from both sides, a finite two-sided limit exists precisely when both finite one-sided limits exist and agree:

lim⁡t→a−F(t)=lim⁡t→a+F(t)=L.\lim_{t\to a^-}F(t)=\lim_{t\to a^+}F(t)=L.

The superscript minus means inputs less than aa; the superscript plus means inputs greater than aa. It does not specify the sign of the output.

Construct a useful table

Choose several inputs approaching the point from each side, use decreasing distances, and keep enough working precision to avoid numerical cancellation. Round only the displayed outputs after computing them.

A table shows selected samples. It can suggest a limit, but finitely many rows cannot prove that every sufficiently close input behaves the same way. Oscillation, a jump between the sampled inputs, or cancellation error can mislead. Check the formula, domain and one-sided behavior as well.

A fresh removable-hole example

Let

H(t)=t2−9t−3,t≠3.H(t)=\frac{t^2-9}{t-3},\qquad t\ne3.

For inputs other than 33, factorization gives H(t)=t+3H(t)=t+3.

Input approaching from the leftOutputInput approaching from the rightOutput
2.85.83.26.2
2.985.983.026.02
2.9985.9983.0026.002

Both sides approach 66. Because t+3t+3 is continuous and agrees with HH on a punctured neighborhood of 33,

lim⁡t→3H(t)=6.\lim_{t\to3}H(t)=6.

The original formula remains undefined at 33. Assigning a value there would define a new extension. Setting that value to 66 makes the extension continuous; another value leaves the same limit but creates a discontinuity.

Recognize a failed two-sided limit

For J(t)=−2J(t)=-2 when t<0t<0 and J(t)=5J(t)=5 when t>0t>0, the left limit at 00 is −2-2 and the right limit is 55. Their disagreement means the two-sided limit does not exist, regardless of any assigned value at 00.

Cancellation preserves nearby values, not missing points

Cancel a common factor only where it is nonzero. A simplification can preserve the limit by agreeing with the original function near the approach point, even though their domains differ at that point. Keep the original restrictions visible when explaining the calculation.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Limit Notation: Estimate a Rational Limit with Eight Table Values

Sources

These references support the core concepts and interpretation boundaries explained above.