PhysicsClassical Physics

Knowledge guide

Why Buoyancy Equals Displaced-Fluid Weight

Connect hydrostatic pressure to buoyancy, distinguish displaced and total volume, and apply floating equilibrium correctly.

Pressure gradients create buoyancy

In a stationary constant-density fluid, pressure increases with downward depth according to p=p0+ρghp=p_0+\rho gh. Pressure acts normal to a surface. The deeper parts of an immersed object experience greater pressure; the resulting net pressure force is upward.

A useful general argument replaces an immersed object with fluid occupying the same volume. In hydrostatic equilibrium, surrounding pressure supports the weight of that fluid. Returning the object without changing the surrounding pressure field gives the same net pressure force. Thus, for uniform fluid density,

FB=ρfluidgVdisplaced.F_B=\rho_{\text{fluid}}gV_{\text{displaced}}.

This is a statement about the surrounding fluid and the volume it cannot occupy, not about the object’s material density alone.

Choose the displaced volume correctly

For a fully immersed object, displaced volume equals its immersed external volume. For a partially immersed object, use only the volume below the fluid surface. An object can experience buoyancy while sinking; FB=mgF_B=mg is an additional equilibrium condition, not the definition of buoyancy.

The simple formula assumes hydrostatic conditions, approximately uniform density and gravity, and fluid contact consistent with the usual immersed-body model. Strong motion, fluid stratification, or a sealed contact excluding fluid from part of the surface needs a more careful pressure-force analysis.

New example: a floating foam block

A uniform foam block has total volume 1.0×10−3 m31.0\times10^{-3}\,\mathrm{m^3} and mass 0.25 kg0.25\,\mathrm{kg}. It floats at rest in a liquid of density 1000 kg/m31000\,\mathrm{kg/m^3}. Assume no vertical force other than weight and buoyancy.

ρfluidgVsubmerged=mg⇒Vsubmerged=0.251000=2.5×10−4 m3.\rho_{\text{fluid}}gV_{\text{submerged}}=mg \quad\Rightarrow\quad V_{\text{submerged}}=\frac{0.25}{1000}=2.5\times10^{-4}\,\mathrm{m^3}.

The submerged fraction is 0.250.25, or 25%25\%. With g=9.8 m/s2g=9.8\,\mathrm{m/s^2}, buoyancy is 2.45 N2.45\,\mathrm N, equal to the weight because the block is floating in equilibrium. Using its entire volume in ρgV\rho gV would describe full immersion and would give a different force.

Avoid three common substitutions

Use fluid density in the buoyancy formula, not object density. Use displaced volume, not automatically total object volume. Keep weight and buoyancy as separate forces before imposing equilibrium. A units check gives (kg/m3)(m/s2)(m3)=N(\mathrm{kg/m^3})(\mathrm{m/s^2})(\mathrm{m^3})=\mathrm N, and the force direction follows from the pressure gradient.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Buoyancy Equation: Prove Archimedes’ Principle from Pressure

Sources

These references support the core concepts and interpretation boundaries explained above.