MathCalculus

Knowledge guide

How to Differentiate Ohm’s Law in Related Rates Problems

Differentiate V=IR in time and keep rate signs and units consistent.

Treat every circuit quantity as a function of time

In a simple circuit V(t)=I(t)R(t)V(t)=I(t)R(t). Differentiating with respect to time requires the product rule:

dVdt=RdIdt+IdRdt.\frac{dV}{dt}=R\frac{dI}{dt}+I\frac{dR}{dt}.

For R≠0R\ne0, the current rate is dIdt=[dV/dt−I(dR/dt)]/R\frac{dI}{dt}=[dV/dt-I(dR/dt)]/R. All values and rates must describe the same instant. A stated decrease is a negative derivative; a stated increase is positive. The result's unit is amperes per second because volts per second divided by ohms equals amperes per second.

A fresh example

Suppose I=2 AI=2\ \mathrm A, R=5 ΩR=5\ \Omega, dV/dt=1 V/sdV/dt=1\ \mathrm{V/s}, and dR/dt=0.2 Ω/sdR/dt=0.2\ \Omega/\mathrm s at one instant. Then dI/dt=[1−(2)(0.2)]/5=0.12 A/sdI/dt=[1-(2)(0.2)]/5=0.12\ \mathrm{A/s}. The positive sign means current is increasing at that instant. This example uses different conditions from the paired exercise; it illustrates the method, not a measured circuit.

Common checks

Do not substitute current values before differentiating IRIR as a time-varying product. Check the sign and unit of each input rate, then confirm the output sign describes an instantaneous change rather than a permanent trend.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Related Rates Calculus: Current Change as Voltage Falls and Resistance Rises

Sources

These references support the core concepts and interpretation boundaries explained above.