PhysicsClassical Physics

Work and Physics: Pulling a Sled at Constant Velocity

Account for the pull’s upward component when finding friction. The pulling force does about +1.79 kJ of work, friction does −1.79 kJ, and the total work is zero.

Question

A sled and passenger together have mass 50 kg. A pulling force acts 25° above the horizontal and moves them 20 m across snow at constant velocity. The coefficient of kinetic friction is μₖ = 0.20. Calculate (a) the work done by the pulling force, (b) the work done by friction, and (c) the total work.

Force balance before calculating work

Use g = 9.80 m/s². The 50 kg sled-and-passenger system moves horizontally at constant velocity, so acceleration is zero in both directions. Let F be the pull magnitude and N the normal force.

The upward component of the 25° pull reduces the normal force:

N=mg−Fsin⁡25∘.N=mg-F\sin25^\circ.

Kinetic friction has magnitude fₖ = μₖN. Horizontal balance gives

Fcos⁡25∘=μk(mg−Fsin⁡25∘),F\cos25^\circ=\mu_k(mg-F\sin25^\circ), F=μkmgcos⁡25∘+μksin⁡25∘=0.20(50)(9.80)cos⁡25∘+0.20sin⁡25∘=98.9068  N.F=\frac{\mu_kmg}{\cos25^\circ+\mu_k\sin25^\circ} =\frac{0.20(50)(9.80)}{\cos25^\circ+0.20\sin25^\circ} =98.9068\;\mathrm N.

Consequently, N = 448.2002 N and fₖ = 89.6400 N. Using N = mg here would miss the upward part of the pull.

(a) Work done by the pulling force

The displacement is 20 m horizontally. Only the force component along that displacement contributes:

WF=Fdcos⁡25∘=(98.9068)(20)cos⁡25∘=+1792.8  J≈+1.79  kJ.W_F=Fd\cos25^\circ =(98.9068)(20)\cos25^\circ =\boxed{+1792.8\;\mathrm J}\approx+1.79\;\mathrm{kJ}.

(b) Work done by friction

Friction acts opposite the displacement:

Wf=fkdcos⁡180∘=−(89.6400)(20)=−1792.8  J≈−1.79  kJ.W_f=f_kd\cos180^\circ =-(89.6400)(20) =\boxed{-1792.8\;\mathrm J}\approx-1.79\;\mathrm{kJ}.

(c) Total work

Gravity and the normal force are perpendicular to the horizontal displacement, so both do zero work. Adding all four forces’ contributions,

Wtotal=WF+Wf+Wg+WN=1792.8−1792.8+0+0=0  J.W_{\mathrm{total}}=W_F+W_f+W_g+W_N =1792.8-1792.8+0+0=\boxed{0\;\mathrm J}.

This also follows from Wₜₒₜₐₗ = ΔK: constant velocity means the kinetic energy does not change. Zero total work does not mean every individual force does zero work.

ForceWork on the sled
Applied pull+1.79 kJ
Kinetic friction−1.79 kJ
Gravity0 J
Normal force0 J

The displayed calculation retains working digits; the nonzero results are about ±1.8 kJ to two significant figures.

Evidence boundary

The mass, distance, kinetic-friction coefficient, constant-velocity condition, and 25° upward pulling direction all follow OpenStax University Physics Volume 1, Chapter 7, Problem 34. This calculation assumes a level surface and uses g = 9.80 m/s². It does not substitute the neighboring exercise’s downward pushing force or 30° angle, and it reports theoretical work rather than experimental measurements.

Sources

Эти источники подтверждают изложенные выше концепции и методы.