MathCalculus

Select Each Limit Law Used to Justify the Computation: lim (x³ + 3x² + 5)/(4 − 7x)

Selecting each limit law means naming the rule that licenses every step: the quotient law for the fraction, the sum and difference laws to split the top and bottom, the constant multiple and power laws for the terms, and the basic limits lim x = a and lim c = c. Applying them gives −3.

Question

In the following exercises, use the limit laws to evaluate each limit. Justify each step by indicating the appropriate limit law(s).

  1. lim⁡x→1x3+3x2+54−7x\displaystyle\lim_{x\to 1}\frac{x^{3}+3x^{2}+5}{4-7x}

Limit laws used

"Select each limit law" means naming the rule that authorises every step of the computation:

  • Quotient law — the expression is a fraction, so the limit of the numerator and the limit of the denominator are taken separately. This is legal only because the denominator has a nonzero limit.
  • Sum law — the numerator x3+3x2+5x^{3}+3x^{2}+5 is a sum, so it splits into lim⁡x3+lim⁡3x2+lim⁡5\lim x^{3}+\lim 3x^{2}+\lim 5.
  • Difference law — the denominator 4−7x4-7x is a difference, so it splits into lim⁡4−lim⁡7x\lim 4-\lim 7x.
  • Constant multiple law — the factors 33 and 77 move outside their limits.
  • Power law — lim⁡x→1x3\lim_{x\to 1}x^{3} and lim⁡x→1x2\lim_{x\to 1}x^{2} are evaluated by raising lim⁡x→1x\lim_{x\to 1}x to the same power.
  • Basic limit results — lim⁡x→ax=a\lim_{x\to a}x=a and lim⁡x→ac=c\lim_{x\to a}c=c, which finish the evaluation.

The product law and the root law are not used here: there is no product of two functions of xx, and no radical.

Step-by-step justification

Apply the quotient law first:

lim⁡x→1x3+3x2+54−7x=lim⁡x→1(x3+3x2+5)lim⁡x→1(4−7x).\lim_{x\to 1}\frac{x^{3}+3x^{2}+5}{4-7x}=\frac{\lim_{x\to 1}\left(x^{3}+3x^{2}+5\right)}{\lim_{x\to 1}\left(4-7x\right)}.

Now use the sum law on the numerator and the difference law on the denominator:

=lim⁡x→1x3+lim⁡x→13x2+lim⁡x→15lim⁡x→14−lim⁡x→17x.=\frac{\lim_{x\to 1}x^{3}+\lim_{x\to 1}3x^{2}+\lim_{x\to 1}5}{\lim_{x\to 1}4-\lim_{x\to 1}7x}.

The constant multiple law pulls 33 and 77 out in front:

=lim⁡x→1x3+3lim⁡x→1x2+lim⁡x→15lim⁡x→14−7lim⁡x→1x.=\frac{\lim_{x\to 1}x^{3}+3\lim_{x\to 1}x^{2}+\lim_{x\to 1}5}{\lim_{x\to 1}4-7\lim_{x\to 1}x}.

The power law turns lim⁡x→1x3\lim_{x\to 1}x^{3} and lim⁡x→1x2\lim_{x\to 1}x^{2} into powers of lim⁡x→1x\lim_{x\to 1}x, and the basic limit results give lim⁡x→1x=1\lim_{x\to 1}x=1 and lim⁡x→15=5\lim_{x\to 1}5=5, lim⁡x→14=4\lim_{x\to 1}4=4:

=13+3(1)2+54−7(1)=9−3=−3.=\frac{1^{3}+3(1)^{2}+5}{4-7(1)}=\frac{9}{-3}=-3.

Limit: −3-3.

Why the quotient law was allowed

The quotient law carries a condition: the limit of the denominator must not be zero. Check it before using the rule:

lim⁡x→1(4−7x)=4−7(1)=−3≠0.\lim_{x\to 1}\left(4-7x\right)=4-7(1)=-3\neq 0.

The condition holds, so the quotient law applies and the evaluation is valid. If that limit had been 00, the quotient law would have been unavailable and the fraction would have had to be rewritten before any law could be used.

Evidence boundary

This page works the limit published as exercise 84 in the OpenStax Calculus Volume 1 §2.3 exercise set, whose instruction is to use the limit laws and to justify each step by naming the appropriate limit law(s). The laws listed follow that section: sum, difference, constant multiple, product, quotient, power, root, and the basic limit results lim x = a and lim c = c. The order in which the laws are applied here is one valid order, not the only one. The page does not claim the problem comes from any other worksheet, textbook or answer key, and it does not extend the computation to a general family of limits.

Sources

Эти источники подтверждают изложенные выше концепции и методы.