Start with a consistent phase convention
A sinusoidal traveling wave can be written
or in an equivalent sine form. A is the maximum displacement from equilibrium. For positive k and ω, the minus sign between kx and ωt means propagation in the positive x direction. The phase constant belongs to the chosen sine or cosine convention.
Relate spatial and temporal cycles
One complete cycle changes phase by 2π. Consequently,
k is measured in rad/m, ω in rad/s, λ in metres, and T in seconds. Frequency f is in hertz. The coefficients of x and t are not directly wavelength and ordinary frequency.
A new sine-wave example
Suppose
This distinct example has A = 0.08 m, λ = 1 m, T = 0.50 s, f = 2 Hz, and propagation speed 2 m/s. At x = t = 0, its displacement is 0.08 sin(π/6) = 0.04 m, which is not the amplitude. Its positive initial phase displaces the t = 0 sine profile to the left by φ/k = 1/12 m.
Separate phase, profile speed, and particle motion
A phase angle is dimensionless and may be reported in radians. A horizontal shift has length units and is −φ/k for the form above. Changing sine to cosine requires changing φ; copying the same phase constant changes the wave.
The speed ω/k describes the moving wave pattern. A particle of a transverse medium moves across the direction of propagation, with velocity ∂y/∂t at its fixed x. Do not identify this particle velocity with the wave speed. As checks, keep the phase dimensionless, verify λ/T = ω/k, and distinguish amplitude from crest-to-trough height 2A.
Related question
Apply this knowledge
Use the concept guide to understand the reasoning, then return to the complete question and worked answer.
Parts of a Wave: Seven Parameters of a Cosine Wave FunctionSources
These references support the core concepts and interpretation boundaries explained above.