MathCalculus

Knowledge guide

How an Initial Condition Selects an Antiderivative on an Interval

Use an initial value to determine the integration constant, then check the derivative, the supplied value, and the connected interval.

A derivative determines a family

An antiderivative GG of gg satisfies G′=gG'=g. On a connected interval, adding a constant leaves the derivative unchanged, and any two antiderivatives of the same function differ by a constant. An initial condition supplies the extra information needed to select one member of this family.

For

y′(t)=g(t),y(t0)=y0,y'(t)=g(t),\qquad y(t_0)=y_0,

first choose any antiderivative GG. Then

y(t)=G(t)+C,C=y0−G(t0).y(t)=G(t)+C,\qquad C=y_0-G(t_0).

Keep the power rule's exception visible

For n≠−1n\ne-1,

∫tn dt=tn+1n+1+C.\int t^n\,dt=\frac{t^{n+1}}{n+1}+C.

The exponent −1-1 requires the logarithmic rule instead. After finding a family, use the initial value rather than dropping the integration constant.

A new initial-value example

Suppose y′(t)=4/t2y'(t)=4/t^2 and y(2)=5y(2)=5. Integrating gives y(t)=−4/t+Cy(t)=-4/t+C. The initial condition yields 5=−2+C5=-2+C, so

y(t)=7−4t,t>0.y(t)=7-\frac4t,\qquad t>0.

Two independent checks finish the solution: its derivative is 4/t24/t^2, and its value at 22 is 55.

An initial value belongs to one interval

Choose an interval where the derivative is defined and that contains the initial point. A singularity can split the domain into separate intervals. The value at t=2t=2 fixes the positive branch in this example, but supplies no value on the negative branch. A single initial condition must not be used to claim uniqueness across such a gap.

A reliable checking method

Verify the derivative, the initial value, and the interval separately. A correct derivative with the wrong constant still fails the initial condition. A formula satisfying both at one point still cannot be extended through a singularity without justification.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Anti Derivative: Solve f′(x) = x⁻³ with f(1) = 1

Sources

These references support the core concepts and interpretation boundaries explained above.