ChemistryGeneral Chemistry

Knowledge guide

How to Tell Whether a Chemical Equation Is Balanced: Atom Conservation Check

Balancing is an atom-counting check: multiply every coefficient by the subscripts inside its formula, add up each element on both sides, and adjust only coefficients until the two sides agree in the smallest whole-number ratio.

What a balanced equation is really claiming

A chemical equation is a bookkeeping statement about atoms. Atoms are not created or destroyed in a chemical change, so a correct equation must show the same number of atoms of each element on the reactant side and on the product side. Everything else about balancing follows from that single requirement: a candidate equation is acceptable exactly when every element's count matches, and it is unacceptable as soon as one element does not.

How to count atoms on one side

The count for one element on one side of the arrow is the sum, over all formulas on that side that contain the element, of the coefficient of the formula multiplied by the subscript on that element inside the formula.

The coefficient multiplies the whole formula, so it multiplies every atom inside it, including atoms written inside parentheses:

  • In 3Ca(OH)23\mathrm{Ca(OH)_2}: Ca =3= 3; O =3×2=6= 3 \times 2 = 6; H =3×2=6= 3 \times 2 = 6.
  • In Ca3(PO4)2\mathrm{Ca_3(PO_4)_2}: Ca =3= 3; P =1×2=2= 1 \times 2 = 2; O =4×2=8= 4 \times 2 = 8.

With that rule, a check is mechanical. Take N2+3H2→2NH3\mathrm{N_2 + 3H_2 \rightarrow 2NH_3}: nitrogen gives 22 against 22, and hydrogen gives 3×2=63 \times 2 = 6 against 2×3=62 \times 3 = 6, so the equation is balanced. Take Fe+O2→Fe2O3\mathrm{Fe + O_2 \rightarrow Fe_2O_3}: iron gives 11 against 22 and oxygen gives 22 against 33, so it is not balanced; multiplying through to 4Fe+3O2→2Fe2O3\mathrm{4Fe + 3O_2 \rightarrow 2Fe_2O_3} restores equal counts.

Three mistakes that look like balancing

  1. Changing a subscript instead of a coefficient. Subscripts define which substance is present. Rewriting H2O\mathrm{H_2O} as H2O2\mathrm{H_2O_2} makes the equation add up but describes a different compound. Only the numbers written in front of formulas may be adjusted.
  2. Counting a polyatomic group as a single atom. PO4\mathrm{PO_4} is a group of phosphorus and oxygen, not a new element. Count P and O separately so that the group's internal atoms are not lost or double counted.
  3. Stopping at a fractional coefficient. A fraction such as 72\tfrac{7}{2} is a legitimate intermediate on the way to a balance, but a finished equation is reported with the smallest whole-number coefficients, obtained by multiplying every coefficient by the same integer.

What a balanced equation does not tell you

Balance fixes atom counts and the mole ratio between species. On its own it says nothing about whether the reaction proceeds at a measurable rate, what temperature, pressure, solvent or catalyst it needs, how far it goes before reaching equilibrium, or how much product is actually isolated. Physical-state symbols, reaction conditions and reaction arrows that show reversibility carry that additional information; they are not part of the atom-conservation test, and an equation can be perfectly balanced while being chemically misleading for any of those reasons.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Which of the Following Chemical Equations Is Balanced? 2H₂ + O₂ → 2H₂O

Sources

These references support the core concepts and interpretation boundaries explained above.