PhysicsClassical Physics

Knowledge guide

Coulomb's Law: Solving for Distance and Checking Inverse-Square Scaling

Use charge magnitudes and SI units to solve Coulomb's law for separation, then test distance changes with inverse-square scaling.

Separate force magnitude from direction

For stationary point charges in vacuum, the electrostatic-force magnitude is:

F=k∣q1q2∣r2,k≈8.99×109 N m2/C2.F=k\frac{|q_1q_2|}{r^2},\qquad k\approx8.99\times10^9\,\mathrm{N\,m^2/C^2}.

The force acts along the line between the charges. Equal signs produce repulsion and opposite signs attraction. Each charge experiences the same force magnitude in opposite directions, even if the charge magnitudes differ.

Use the absolute product when calculating a magnitude. A negative charge product is a direction cue, not a negative distance or a reason to take a square root of a negative number.

Rearrange before substituting

If force and both charges are known, the distance follows from:

r=k∣q1q2∣F.r=\sqrt{\frac{k|q_1q_2|}{F}}.

The positive root is the physical separation. The product k|q₁q₂| has units N·m², so dividing by force leaves m² under the root.

Convert both charges first: nC means 10⁻⁹ C, while μC means 10⁻⁶ C. Forgetting a prefix in either factor changes the product dramatically. Do not substitute a total charge for the product of two distinct charges.

A new distance example

Two point charges have magnitudes 2.0 nC and 8.0 nC. If their force magnitude is 0.020 N, their separation is:

r=(8.99×109)(2.0×10−9)(8.0×10−9)0.020=2.7×10−3 m.r=\sqrt{\frac{(8.99\times10^9)(2.0\times10^{-9})(8.0\times10^{-9})}{0.020}} =2.7\times10^{-3}\,\mathrm{m}.

This example uses unequal charges and different data from the related Question. Substitution of the unrounded distance recovers the specified force.

Inverse-square scaling makes a quick check

For unchanged charges:

FnewFold=(roldrnew)2.\frac{F_{\mathrm{new}}}{F_{\mathrm{old}}}=\left(\frac{r_{\mathrm{old}}}{r_{\mathrm{new}}}\right)^2.

Doubling separation reduces force to one quarter. To reduce force by a factor of nine, increase the distance by a factor of three. If the force increases, the required distance must decrease.

For changing charges too, use:

FnewFold=∣q1,newq2,new∣∣q1,oldq2,old∣(roldrnew)2.\frac{F_{\mathrm{new}}}{F_{\mathrm{old}}}=\frac{|q_{1,\mathrm{new}}q_{2,\mathrm{new}}|}{|q_{1,\mathrm{old}}q_{2,\mathrm{old}}|}\left(\frac{r_{\mathrm{old}}}{r_{\mathrm{new}}}\right)^2.

This ratio separates the charge effect from the distance effect.

Know the model boundary

The point-charge formula applies directly to point charges; it is an approximation for small charged bodies whose size is negligible compared with their separation. Extended conductors can redistribute charge, and a material medium changes the relevant permittivity. For several charges, add force vectors rather than adding their magnitudes without regard to direction.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Coulomb's Law: Separation of Two 75.0 nC Charges Exerting 1.00 N

Sources

These references support the core concepts and interpretation boundaries explained above.