PhysicsClassical Physics

Knowledge guide

Capacitance Units: Farads, Prefixes and Charge–Voltage Checks

Read capacitance as coulombs per volt, convert pF, nF, μF and mF, and use Q = CV to check whether a conversion makes sense.

A farad measures charge per voltage

For an ideal linear capacitor at fixed geometry and dielectric conditions,

C=Q∣ΔV∣,Q=C∣ΔV∣.C=\frac{Q}{|\Delta V|},\qquad Q=C|\Delta V|.

QQ is the magnitude of charge on either plate, not the sum of the magnitudes on both plates. A capacitor can have plates carrying +Q+Q and −Q-Q while its total net charge is zero.

The farad is

1 F=1 C/V.1\,\mathrm F=1\,\mathrm{C/V}.

The italic symbol CC for capacitance and the upright coulomb unit C\mathrm C share a letter but identify different quantities. Capacitance is not charge, voltage, or a voltage rating.

Prefixes change scale, not the physical capacitor

Capacitance unitValue in farads
Picofarad, pF10−12 F10^{-12}\,\mathrm F
Nanofarad, nF10−9 F10^{-9}\,\mathrm F
Microfarad, μF\mu\mathrm F10−6 F10^{-6}\,\mathrm F
Millifarad, mF10−3 F10^{-3}\,\mathrm F

Thus 1 μF=1000 nF1\,\mu\mathrm F=1000\,\mathrm{nF} and 1 nF=1000 pF1\,\mathrm{nF}=1000\,\mathrm{pF}. The prefixes m and μ differ by a factor of 1000; millifarads and microfarads are not interchangeable.

A new example starting with capacitance

Take a 47 nF47\,\mathrm{nF} ideal capacitor across 9.0 V9.0\,\mathrm V:

C=47×10−9 F=0.047 μF,C=47\times10^{-9}\,\mathrm F=0.047\,\mu\mathrm F, Q=CV=(47×10−9)(9.0)=4.23×10−7 C≈0.42 μC.Q=CV=(47\times10^{-9})(9.0) =4.23\times10^{-7}\,\mathrm C \approx0.42\,\mu\mathrm C.

Using the unrounded arithmetic value, division returns the input:

0.423 μC9.0 V=0.047 μF=47 nF.\frac{0.423\,\mu\mathrm C}{9.0\,\mathrm V} =0.047\,\mu\mathrm F=47\,\mathrm{nF}.

This illustrates that μC/V yields μF directly; it does not yield F unless the micro prefix is converted away.

Distinguish the model from component selection

In the ideal linear model, doubling the applied voltage doubles the stored charge while leaving CC fixed. Changing plate geometry or dielectric changes the capacitance. A real component's allowable voltage and tolerance are separate specifications; a computed capacitance alone does not establish either.

A reliable conversion keeps the same value when returned to farads, and a reliable charge–voltage calculation reproduces the supplied quantity when substituted into Q=CVQ=CV. Retain extra digits during calculation, then round in the final result according to the supplied precision.

Related question

Apply this knowledge

Use the concept guide to understand the reasoning, then return to the complete question and worked answer.

Capacitance Units: Storing 3.00 μC at 120 V

Sources

These references support the core concepts and interpretation boundaries explained above.