An exponent applies to the entire conversion ratio
For a length relation , area and volume relations follow by raising both sides to the corresponding power:
The numeric factor and the unit must be squared or cubed together. A larger unit contains more area or volume than the same numeric length comparison suggests.
A new area example
Convert to square centimeters. Since ,
Multiplying by 30.48 once would produce ft·cm rather than cm². Looking at the uncancelled units reveals the mistake before a calculator is needed.
A new volume example
Convert to liters. A meter contains 10 decimeters, so a cubic meter contains cubic decimeters. Since ,
The liter is a volume unit. Relating it to cubic length units requires a cubic relation, not a length-prefix conversion used only once.
Convert mixed lengths before adding
For a length written in two units, express both parts in a common unit first. Do not treat a feet-and-inches measurement as a decimal number of feet. Convert the sum after the units are consistent.
Mass and volume are different dimensions
An ounce of mass and a fluid ounce do not share a conversion factor. To convert mass to another mass unit, use a mass relation. To convert volume to another volume unit, use a volume relation. Going between mass and volume requires a material's density as an additional input.
Check size and precision
Convert an area or volume back with the reciprocal ratio raised to the same power. The original quantity should be recovered, subject to final rounding. Retain digits through the calculation, then report precision supported by the measured input. Defined conversion factors are exact relationships; they do not add measurement precision to an estimate.
Related question
Apply this knowledge
Use the concept guide to understand the reasoning, then return to the complete question and worked answer.
Unit Conversions: Seven Length, Area, Volume, and Mass ProblemsSources
These references support the core concepts and interpretation boundaries explained above.